Send us an email by entering your details and any comments you may have in the form

    By submitting this form, you agree to allow your information to be saved by Saving Plumbing and you consent to occasionally receive electronic correspondence by Saving Plumbing.

    Just about everything in this world that is used and reused over and over again needs repairs and maintenance. To keep the severity and cost of repairs low it is essential that you have a strategic and regular preventive maintenance schedule followed diligently. The same principle applies to your plumbing systems as well, residential or commercial. It is all the more necessary to have it done by a professional in case of commercial plumbing as the usage is more and often round the clock unlike residential homes. Moreover the plumbing design will vary according to business therefore need for a professional is paramount.

    Have Uninterrupted Business

    A regular and proper preventive maintenance for Commercial plumbing Toronto will ensure uninterrupted business, and even prevent damage caused to property. It will also keep the utility bills low. Therefore, you should look for any signs of a leak in any exposed pipe that runs along the walls especially in the foundation area. Such signs will be puddles of water or any other watermarks. Also look out for any signs of corrosion which will once again cause leaks. The signs include green stains around fittings made of copper and brass. There may be orange or yellow stains on old steel pipes as well.

    Run Few Checks On Fittings

    You must test for the water pressure at the shower heads and faucets. If you find it is low then rest assured that there are sediment depositions or a problem with the supply line. Shower heads can be removed and cleaned by you but for problems in the water line call a professional. Check the sink and tub drainage as well and if you find it to be slow then there may be clogging inside. Bubbles or gurgling sound instead of a full swirl is a sign of venting problem. Do not forget to check the submersible sewage pump Toronto from time to time as well.

    Your house may flood any time due to several reasons and natural effects are the most common ones. Installing an electric sump pump is an affordable and a very effective but for its only drawback in the design which is a very serious concern as it does not operate during a blackout. There may be severe rainstorms that can knock off electric poles disrupting its supply. This will make your sump pump inoperable when you need the most. To avoid these hassles it is best to have a sump pump with battery backup installed. This will not only save you from inconvenience but will also prevent your property from major damage.

    The Working Process And Mechanics

    The working process of the battery backup sump pump Toronto and its mechanics include a two stage system that enables it to run even when there is no power. Usually, there is a 120 volt electric sump pump that is connected with a 12 volt backup pump. This backup pump runs off a deep cycle marine battery. Under normal operating conditions the electric pump will work to remove water from the pit but in case when the power goes off the backup pump will turn on automatically when the pit is full of water, even when the power goes out.

    The Useful Features Of It

    You can charge this battery operated back up sewage ejector pump Toronto with any charger. Apart from that these pumps are easy to operate and install as well. With the installation instructions followed you can install it yourself in 2 to 4 hours. Just make sure you seal the valve with tape to prevent back flow, protect the battery in a plastic case put on a wall mounted shelf, use proper diameter of PVC pipe for water discharge and have safe and proper electrical connections.

    About Saving Plumbing

    What Our Clients Say